ANALISIS AERODINAMIKA PADA PERMUKAAN BODI KENDARAAN MOBIL LISTRIK GASKI (GANESHA SAKTI) DENGAN PERANGKAT LUNAK ANSYS 14.5

Authors

  • Yudi Prihadnyana Universitas Pendidikan Ganesha
  • Gede Widayana Universitas Pendidikan Ganesha
  • Kadek Rihendra Dantes Universitas Pendidikan Ganesha

DOI:

https://doi.org/10.23887/jjtm.v5i2.11246

Abstract

Dengan perkembangan teknologi yang semakin maju bentuk dari bodi sebuah kendaraan sangatlah diperhitungkan untuk mencapai tujuan-tujuan tertentu. Untuk itu, dilakukan analisis Aerodinamika pada pemukaan bodi mobil listrik gaski dengan menggunakan perangkat lunak Ansys 14.5, yang bertujuan untuk mengetahui aliran fluida dan nilai koefisient drag pada mobil listrik Gaski bodi standar dan modifikasi. Setelah proses analisis dilakukan, didapatkan hasil velocity udara maksimum body standar sebesar 17,4324 m/s dan body modifikasi sebesar 17,7321 m/s dan pressure maksimum yang terjadi pada mobil listrik Gaski body standar sebesar 83,2143 Pa, dan minimum sebesar -189,879 Pa. sedangkan pressure maksimum yang terjadi pada mobil listrik Gaski body modifikasi sebesar 83,2143 Pa. dan minimum pressure diperoleh -182,128 Pa. nilai Koefisient drag dari mobil listrik Gaski body standar sebesar 0,00474 sedangkan pada body modifikasi sebesar 0,00407. Dari hasil peneletian tersebut didapatkan bahwa setalah dilakukan modifikasi pada bodi mobil listrik gaski terdapat beberapa perubahan diantaranya terjadi peningkatan kecepatan laju aliran udara atau velocity udara meningkat 1,72 % sedangkan tekanan yang diterima oleh bodi setelah dimodifikasi menurun 1,39 % dan Nilai koefisien drag pada mobil listrik gaski dapat diturunkan 14,14 % setelah dimodifikasi.
Kata Kunci : kata kunci : Aerodinamika, aliran fluida, bodi kendaraan,

With the technological development of the more advanced form of the body of a vehicle is very calculated to achieve certain goals. For that purpose, Aerodynamic analysis was performed on the electric car body surface by using Ansys 14.5 software, which aims to find out the fluid flow and coefficient value of drag on electric car Gaski standard body and modification. After the analysis process is done, the result of the maximum air velocity of the standard body is 17,4324 m / s and body modification of 17,7321 m / s and the maximum pressure happened to electric car Gaski body standard equal to 83,2143 Pa, 189,879 Pa. While the maximum pressure that occurs on electric cars Gaski body modification of 83.2143 Pa. And the minimum pressure obtained -182.128 Pa. Coefficient value of drag from electric car Gaski body standard of 0,00474 while at body modification equal to 0,00407. From the results of the research was found that after modification on the body of electric car gaski there are some changes such as increase the speed of air flow rate or air velocity increased by 1.72%, while the pressure received by the body after modification decreased 1.39% and the value of drag coefficient on Electric car gaski can be derived 14.14% after modified.
keyword : Keywords : Aerodynamic, fluid flow rate, Vehicle body.

Published

2017-08-25

Issue

Section

Articles