Care for Mechanics: Development of Motorcycle Workbench Based on ADDIE Model to Reduce Musculoskeletal Disorders

Penulis

  • Riska Ade Junara Universitas Sebelas Maret, Surakarta, Indonesia
  • Yuyun Estriyanto Universitas Sebelas Maret, Surakarta, Indonesia
  • Towip Universitas Sebelas Maret, Surakarta, Indonesia

DOI:

https://doi.org/10.23887/jstundiksha.v12i2.52850

Kata Kunci:

Mechanics, Motorcycle workbench, Musculoskeletal Disorders (MSDs)

Abstrak

In a developing country like Indonesia, where the majority of the population is working in the informal sectors, there is a need for ergonomic tool intervention, which is low cost, and easy in terms of manufacturability with locally available materials.  The rapid growth of motorcycle sales in Indonesia has stimulated the growth of motorcycle repair workshops. However, some of the non-authorized repair workshops ignore the occupational safety of the mechanics. This study aims to develop a motorcycle workbench as a tool for maintenance work to reduce musculoskeletal disorders (MSDs). The present study used Research and Development (R&D) with the ADDIE model combined with an ergonomic approach. The research subjects were 4 mechanics from one private workshop. Data was collected using interview, observation, and questionnaire techniques. The MSDs data was analyzed using Nordic Musculoskeletal Questionnaire (NMQ). The ergonomic risk factors were analyzed using Rapid Upper Limb Assessment (RULA) and Ovako Work Posture Analysis System (OWAS).  The result showed an improvement in the work posture of mechanics. The MSDs complaint decreased based on NMQ Score. Furthermore, the RULA score and OWAS score also decreased. Thus, the development of the motorcycle workbench succeeded in reducing the MSDs complaint and improving mechanics’ occupational safety.

Referensi

Alsaleh, N. (2020). The effectiveness of an instructional design training program to enhance teachers’ perceived skills in solving educational problems. Academic Journal, 15(12), 751–763. https://doi.org/10.5897/ERR2020.4082.

Aminuddin, M., Sahroni, T. R., Smaz, N., & Yudistira, J. (2018). Work posture analysis Based on Rapid Upper Limb Assessment (RULA) for operator cellroom electrolyser. IEOM Society, 2625–2634. https://nopr.niscpr.res.in/handle/123456789/48456.

Aziz, B. A., Handoko, L., & Juniani, A. I. (2019). Risk Analysis of Musculoskeletal Complaints with Rula Method in Chemical Company. IOP Conference Series: Materials Science and Engineering, 462(1). https://doi.org/10.1088/1757-899X/462/1/012041.

Bernardes, J. M., Ruiz-Frutos, C., Moro, A. R. P., & Dias, A. (2021). A low-cost and efficient participatory ergonomic intervention to reduce the burden of work-related musculoskeletal disorders in an industrially developing country: an experience report. International Journal of Occupational Safety and Ergonomics, 27(2), 452–459. https://doi.org/10.1080/10803548.2019.1577045.

Borz, S. A., Oghnoum, M., Marcu, M. V., Lorincz, A., & Proto, A. R. (2021). Performance of small-scale sawmilling operations: A case study on time consumption, productivity and main ergonomics for a manually driven bandsaw. Forests, 12(6). https://doi.org/10.3390/f12060810.

Brandt, M., Wilstrup, N. M., Jakobsen, M. D., Eerd, D. Van, Andersen, L. L., & Ajslev, J. Z. N. (2021). Engaging Occupational Safety and Health Professionals in Bridging Research and Practice : Evaluation of a Participatory Workshop Program in the Danish Construction Industry. Int. J. Environ. Res. Public Health, 18(16). https://doi.org/https://doi.org/10.3390/ ijerph18168498.

Burgess-Limerick, R. (2018). Participatory ergonomics: Evidence and implementation lessons. Applied Ergonomics, 68(December 2017), 289–293. https://doi.org/10.1016/j.apergo.2017.12.009.

Cahyadi, D., & Soeprapto, E. F. (2021). Aplikasi Data Antropometri pada Perancangan Produk furnitur (Annuha Zarkasyi (ed.); I). Literasi Nusantara.

Calvetti, D., Mêda, P., Gonçalves, M. C., & Sousa, H. (2020). Worker 4.0: The future of sensored construction sites. Buildings, 10(10), 1–22. https://doi.org/10.3390/BUILDINGS10100169.

Carayon, P. (2021). Social and Organizational Foundation of Ergonomics: Multi‐Level Systems Approaches. In Handbook of Human Factors and Ergonomics. https://doi.org/10.1002/9781119636113.ch8.

Chairani, A. (2020). Validity and Reliability Test of the Nordic Musculoskeletal Questionnaire With Formal and Informal Sector Workers. The 7th International Conference on Public Health, 100–106. https://doi.org/10.26911/the7thicph-fp.05.06.

Coombs, C., Hislop, D., Taneva, S. K., & Barnard, S. (2020). The strategic impacts of Intelligent Automation for knowledge and service work: An interdisciplinary review. Journal of Strategic Information Systems, 29(4), 8–11. https://doi.org/10.1016/j.jsis.2020.101600.

Dagne, D., Abebe, S. M., & Getachew, A. (2020). Work-related musculoskeletal disorders and associated factors among bank workers in Addis Ababa, Ethiopia: A cross-sectional study. Environmental Health and Preventive Medicine, 25(1), 1–8. https://doi.org/10.1186/s12199-020-00866-5.

Das, M. (2021). Identification of Occupational Health Hazards in Sheet Metal Industry through REBA and RULA Method. Journal of Ergonomics, 11(6), 1–7. https://doi.org/10.1080/15440478.2022.2162182.

DesMarais, T., & Wyatt, R. (2021). A Proposed Method for Improving Ergonomic Risk in Maintenance Jobs. Annual International Occupational Ergonomics and Safety Conference, 7–14. https://doi.org/10.47461/isoes.2021_007.

Enez, K., & Nalbantoğlu, S. S. (2019). Comparison of ergonomic risk assessment outputs from OWAS and REBA in forestry timber harvesting. International Journal of Industrial Ergonomics, 70(April 2018), 51–57. https://doi.org/10.1016/j.ergon.2019.01.009.

Ezugwu, U. A., Egba, E. N., Igweagu, P. C., Eneje, L. E., Orji, S., & Ugwu, U. C. (2020). Awareness of Awkward Posture and Repetitive Motion as Ergonomic Factors Associated With Musculoskeletal Disorders by Health Promotion Professionals. Global Journal of Health Science, 12(6), 128. https://doi.org/10.5539/gjhs.v12n6p128.

Fusaro, G., & Kang, J. (2021). Participatory approach to draw ergonomic criteria for window design. International Journal of Industrial Ergonomics, 82(January), 103098. https://doi.org/10.1016/j.ergon.2021.103098.

Heidarimoghadam, R., Mohammadfam, I., Babamiri, M., Soltanian, A. R., Khotanlou, H., & Sohrabi, M. S. (2022). What do the different ergonomic interventions accomplish in the workplace? A systematic review. International Journal of Occupational Safety and Ergonomics, 28(1), 600–624. https://doi.org/10.1080/10803548.2020.1811521.

Herdiman, L., Susmartini, S., Priadythama, I., & Herdiman, L. (2020). Application of the Total Ergonomics in Designing Functional Prosthetic Ankle with Low Cost in Indonesia. IOP Conference Series: Materials Science and Engineering, 1003(1). https://doi.org/10.1088/1757-899X/1003/1/012004.

Hossain, M. D., Aftab, A., Al Imam, M. H., Mahmud, I., Chowdhury, I. A., Kabir, R. I., & Sarker, M. (2018). Prevalence of work related musculoskeletal disorders (WMSDs) and ergonomic risk assessment among readymade garment workers of Bangladesh: A cross sectional study. PLoS ONE, 13(7), 1–18. https://doi.org/10.1371/journal.pone.0200122.

Irawan, A. P., Utama, D. W., Affandi, E., Michael, M., & Suteja, H. (2019). Product design of chairless chair based on local components to provide support for active workers. IOP Conference Series: Materials Science and Engineering, 508(1). https://doi.org/10.1088/1757-899X/508/1/012054.

Ismara, K. I., & Prianto, E. (2020). Safety education management in welding robotic laboratory. Journal of Physics: Conference Series, 1446(1). https://doi.org/10.1088/1742-6596/1446/1/012061.

Jadhav, G. S., Arunachalam, M., & Salve, U. R. (2020). Ergonomics and efficient workplace design for hand-sewn footwear artisans in Kolhapur, India. Work, 66(4), 849–860. https://doi.org/10.3233/WOR-203230.

Jain, R., Bihari Rana, K., Lal Meena, M., & Sidh, S. (2020). Ergonomic assessment and hand tool redesign for the small scale furniture industry. Materials Today: Proceedings, 44, 4952–4955. https://doi.org/10.1016/j.matpr.2020.12.762.

Joshi, M., & Deshpande, V. (2019). A systematic review of comparative studies on ergonomic assessment techniques. International Journal of Industrial Ergonomics, 74(July), 102865. https://doi.org/10.1016/j.ergon.2019.102865.

Kalteh, H. O., Salesi, M., Cousins, R., & Mokarami, H. (2020). Assessing safety culture in a gas refinery complex: Development of a tool using a sociotechnical work systems and macroergonomics approach. Safety Science, 132(September), 104969. https://doi.org/10.1016/j.ssci.2020.104969.

Karuppiah, K., Sankaranarayanan, B., Ali, S. M., & Kabir, G. (2020). Role of ergonomic factors affecting production of leather garment-based SMEs of India: Implications for social sustainability. Symmetry, 12(9). https://doi.org/10.3390/SYM12091414.

Kataria, K. K., Sharma, M., Kant, S., Suri, N. M., & Luthra, S. (2022). Analyzing musculoskeletal risk prevalence among workers in developing countries: an analysis of small-scale cast-iron foundries in India. Archives of Environmental and Occupational Health, 77(6), 486–503. https://doi.org/10.1080/19338244.2021.1936436.

Kee, D. (2021). Comparison of OWAS, RULA and REBA for assessing potential work-related musculoskeletal disorders. International Journal of Industrial Ergonomics, 83(August 2020), 103140. https://doi.org/10.1016/j.ergon.2021.103140.

Koopman, A. S., Kingma, I., de Looze, M. P., & van Dieën, J. H. (2020). Effects of a passive back exoskeleton on the mechanical loading of the low-back during symmetric lifting. Journal of Biomechanics, 102(xxxx), 109486. https://doi.org/10.1016/j.jbiomech.2019.109486.

Kuorinka, I., Jonsson, B., Kilbom, A., Vinterberg, H., Biering-Sørensen, F., Andersson, G., & Jørgensen, K. (1987). Standardised Nordic questionnaires for the analysis of musculoskeletal symptoms. Applied Ergonomics, 18(3), 233–237. https://doi.org/10.1016/0003-6870(87)90010-X.

Lawson, G., R, P. P., Hermawati, S., & Ryan, B. (2021). Participatory Ergonomics in Industrially Developing Countries: A Literature Review. International Journal of Mechanical Engineering Technologies and Applications, 2(8), 53–59. https://doi.org/https://doi.org/10.21776/MECHTA.2021.002.01.8.

Lins, C., Fudickar, S., & Hein, A. (2021). OWAS inter-rater reliability. Applied Ergonomics, 93(January), 103357. https://doi.org/10.1016/j.apergo.2021.103357.

Lööw, J. (2020). Attractive work and ergonomics: designing attractive work systems. Theoretical Issues in Ergonomics Science, 21(4), 442–462. https://doi.org/10.1080/1463922X.2019.1694728.

Lowe, B. D., Dempsey, P. G., & Jones, E. M. (2019). Ergonomics assessment methods used by ergonomics professionals. Applied Ergonomics, 81, 102882. https://doi.org/10.1016/j.apergo.2019.102882.

Luwes, U. H. G., Himawanto, D. A., & Widyastono, H. (2021). Pengembangan Alat Olahraga Kursi Roda Balap Bagi Anak Tunadaksa Berbasis Ergonomi. Jurnal Orthopedagogik, 10(2), 181–187. https://doi.org/https://doi.org/10.23887/jstundiksha.v10i2.35553.

Macdonald, W., & Oakman, J. (2022). The problem with “ergonomics injuries”: What can ergonomists do? Applied Ergonomics, 103, 103774. https://doi.org/10.1016/j.apergo.2022.103774.

Mahachandra, M., Prastawa, H., & Susilo, D. Y. (2018). Working posture analysis of sweet whey powder handling at CV Cita Nasional warehouse using OVAKO Working Posture Analysis (OWAS). SHS Web of Conferences, 49, 02013. https://doi.org/10.1051/shsconf/20184902013.

Mambwe, M., Mwanaumo, E. M., Thwala, W. D., & Aigbavboa, C. O. (2021). Evaluating occupational health and safety management strategy success factors for small-scale contractors in zambia. Sustainability (Switzerland), 13(9). https://doi.org/10.3390/su13094696.

Mandal, J. K., & Math, M. M. (2021). Biomechanical and RULA Analysis of an Office Chair for Computer Users –A Case Study in Indian Context. International Research Journal of Engineering and Technology, 8(1), 985–989. https://www.academia.edu/download/65477638/IRJET_V8I1179.pdf.

Manke, A. V., & Mukhopadhyay, P. (2019). Ergonomic Design Issues in Roadside Motorcycle Repairing in India. 2019 IEEE Global Humanitarian Technology Conference (GHTC), 1–4. https://doi.org/10.1109/GHTC46095.2019.9033124.

Manzoor Hussain, M., Qutubuddin, S. M., Kumar, K. P. R., & Reddy, C. K. (2019). Digital human modeling in ergonomic risk assessment of working postures using RULA. Proceedings of the International Conference on Industrial Engineering and Operations Management, MAR, 2714–2725. http://ieomsociety.org/ieom2019/papers/582.pdf.

Mazloumi, A., Mehrdad, R., Kazemi, Z., Vahedi, Z., & Hajizade, L. (2021). Risk Factors of Work Related Musculoskeletal Disorders in Iranian Workers during 2000-2015. Journal of Health and Safety at Work, 11(3), 395–416. https://dl.hsenk.ir/uploads/2022/08/HSEnk-1558.pdf.

O.Nyumba, T., Wilson, K., Derrick, C. J., & Mukherjee, N. (2018). The use of focus group discussion methodology: Insights from two decades of application in conservation. Methods in Ecology and Evolution, 9(1), 20–32. https://doi.org/10.1111/2041-210X.12860.

Omura, Y., Hirata, M., Yoshimine, T., Nakatani, E., & Inoue, T. (2022). Development and evaluation of a new assistive device for low back load reduction in caregivers : an experimental study. Scientific Reports, 12, 1–13. https://doi.org/10.1038/s41598-022-21800-5.

Pulik, Ł., Dyrek, N., Piwowarczyk, A., Jaśkiewicz, K., Sarzyńska, S., & Łęgosz, P. (2020). The update on scales and questionnaires used to assess cervical spine disorders. Physical Therapy Reviews, 26(2), 150–158. https://doi.org/10.1080/10833196.2020.1814124.

Puswadi, H. A., & Sunyoto, S. (2021). Rancang Bangun Alat Pengering Bahan Makanan Berbasis Wings Drying System Dengan Dua Sumber Panas. Jurnal Ilmiah Teknosains, 7(1/Mei), 36–43. https://doi.org/10.26877/jitek.v7i1/mei.8298.

Ramadhani, M., Prayogo, D., & P, D. A. D. (2018). Assessment Analysis of Ergonomics Work Posture on Wheel Installation With Ovako Work Posture Analysis System ( OWAS ) Method and Rapid Entire Body Assesment ( REBA ) Method Preventing Musculoskeleal Disorders AT Perum PPD Jakarta. Journal Of Humanities And Social Science, 23(10), 1–11. https://doi.org/10.9790/0837-2310030111.

Ramdan, I. M., Duma, K., & Setyowati, D. L. (2019). Reliability and Validity Test of the Indonesian Version of the Nordic Musculoskeletal Questionnaire (NMQ) to Measure Musculoskeletal Disorders (MSD) in Traditional Women Weavers. Global Medical & Health Communication (GMHC), 7(2). https://doi.org/10.29313/gmhc.v7i2.4132.

Reiman, A., Kaivo-oja, J., Parviainen, E., Takala, E. P., & Lauraeus, T. (2021). Human factors and ergonomics in manufacturing in the industry 4.0 context – A scoping review. Technology in Society, 65, 101572. https://doi.org/10.1016/j.techsoc.2021.101572.

Sa’Diyah, N., Maksum, M., & Mulyati, G. T. (2021). Reducing MSDs and physical workload of manual-harvesting peasan. IOP Conference Series: Earth and Environmental Science, 686(1). https://doi.org/10.1088/1755-1315/686/1/012005.

Saeidnia, H. R., Kozak, M., Ausloos, M., Herteliu, C., Mohammadzadeh, Z., Ghorbi, A., Karajizadeh, M., & Hassanzadeh, M. (2022). Development of a Mobile App for Self-Care Against COVID-19 Using the Analysis, Design, Development, Implementation, and Evaluation (ADDIE) Model: Methodological Study. JMIR Formative Research, 6(9), e39718. https://doi.org/10.2196/39718.

Santoso, G. (2022). Physiological Ergonomics for Preventing the Risk of Musculoskeletal Disorders. Specialusis Ugdymas, 1(43), 7645–7654. http://sumc.lt/index.php/se/article/view/1050.

Sing, L. S., Mahmood, S., Jiran, N. S., & Hassan, M. F. (2022). Ergonomics and Improvement of Workplace Layout Design in Automotive Service Sector at Motorcycle Repair Workshop. Journal of Design for Sustainable and Environment, 4(2). http://fazpublishing.com/jdse/index.php/jdse/article/view/31.

Suhardi, B., Sari, F. P., & Astuti, R. D. (2018). The Proposed Improvement of Work Posture as An Attempt in Lowering The Risk of Musculoskeletal Disorder. Jurnal Ilmiah Teknik Industri, 17(2), 117. https://doi.org/10.23917/jiti.v17i2.6638.

Sun, X., Houssin, R., Renaud, J., & Gardoni, M. (2019). A review of methodologies for integrating human factors and ergonomics in engineering design. International Journal of Production Research, 57(15–16), 4961–4976. https://doi.org/10.1080/00207543.2018.1492161.

Suresh, A., Ramesh Bapu, B. R., Ragalakshmi, S., Prince Packiyaraj, P., Adharsh, S., & Abul Kalam Azad, A. (2020). Improving and standardization of industrial workers related to cognitive ergonomics. AIP Conference Proceedings, 2283(10). https://doi.org/10.1063/5.0025513.

Tamene, A., Mulugeta, H., Ashenafi, T., & Thygerson, S. M. (2020). Musculoskeletal Disorders and Associated Factors among Vehicle Repair Workers in Hawassa City, Southern Ethiopia. Journal of Environmental and Public Health, 2020, 11. https://doi.org/10.1155/2020/9472357.

Tanase, M., Chivu, O., Tapirdea, A., Nitoi, D., & Petrescu, and V. (2021). Research Regarding Works Ergonomics in Automotive Repair Shop. IOP Conf. Series: Materials Science and Engineering, 1182(2021), 012078. https://doi.org/10.1088/1757-899X/1182/1/012078.

Tang, K. H. D. (2020). Abating Biomechanical Risks: A Comparative Review of Ergonomic Assessment Tools. Journal of Engineering Research and Reports, 3(17), 41–51. https://doi.org/10.9734/jerr/2020/v17i317191.

Theurel, J., & Desbrosses, K. (2019). Occupational Exoskeletons: Overview of Their Benefits and Limitations in Preventing Work-Related Musculoskeletal Disorders. IISE Transactions on Occupational Ergonomics and Human Factors, 7(3–4), 264–280. https://doi.org/10.1080/24725838.2019.1638331.

Wang, J., Li, Y., Hu, G., & Yang, M. (2019). Lightweight research in engineering: A review. Applied Sciences (Switzerland), 9(24), 1–24. https://doi.org/10.3390/app9245322.

Wang, P.-C., Yang, C.-C., Huang, Y.-C., & Cheng, Y.-S. (2022). A Case Study of Ergonomics Prevention Program in a Machine Manufacture Industry. RSF Conference Series: Engineering and Technology, 2(1), 18–22. https://doi.org/10.31098/cset.v2i1.538.

Yazdanirad, S., Khoshakhlagh, A. H., Habibi, E., Zare, A., Zeinodini, M., & Dehghani, F. (2018). Comparing the Effectiveness of Three Ergonomic Risk Assessment Methods-RULA, LUBA, and NERPA-to Predict the Upper Extremity Musculoskeletal Disorders. Indian Journal of Occupational and Environmental Medicine, 22(1), 17–21. https://doi.org/https://doi.org/10.4103/ijoem.IJOEM_23_18.

Yovi, E. Y., & Yamad, Y. (2019). Addressing occupational ergonomics issues in indonesian forestry: Laborers, operators, or equivalent workers. Croatian Journal of Forest Engineering, 40(2), 351–363. https://doi.org/10.5552/crojfe.2019.558.

Yu, S. J., Hsueh, Y. L., Sun, J. C. Y., & Liu, H. Z. (2021). Developing an intelligent virtual reality interactive system based on the ADDIE model for learning pour-over coffee brewing. Computers and Education: Artificial Intelligence, 2, 100030. https://doi.org/10.1016/j.caeai.2021.100030.

Zeverdegani, S. K., Yazdi, M., & MollaAghaBabaee, A. H. (2022). Latent class-derived patterns of musculoskeletal disorders in sedentary workers and chair ergonomic design. International Journal of Occupational Safety and Ergonomics, 28(3), 1636–1641. https://doi.org/10.1080/10803548.2021.1916239.

Zulkarnain, M. A., Setyaningsih, Y., & Wahyuni, I. (2021). Personal characteristic, occupational, work environment and psychosocial stressor factors of musculoskeletal disorders (MSDs) complaints on bus driver: Literature review. IOP Conference Series: Earth and Environmental Science, 623(1). https://doi.org/10.1088/1755-1315/623/1/012013.

Unduhan

Diterbitkan

2023-10-22

Terbitan

Vol 12 No 2 (2023): July

Bagian

Articles

Lisensi

Hak Cipta (c) 2022 Towip Towip

Creative Commons License

Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with the Jurnal Sains dan Teknologi (JST)   agree to the following terms:

  1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. (See The Effect of Open Access)