Rancang Bangun Alat Pemberitahuan Otomatis Menggunakan Sensor Gerak Pir (Passive Infra Red) Berbasis Audio untuk Memberi Himbauan Protokol Kesehatan di Kantor Badan Penelitian, Pengembangan dan Inovasi Daerah Kabupaten Buleleng

Authors

  • wildanun mukholladun Universitas Pendidikan Ganesha
  • Nyoman Santiyadnya Universitas Pendidikan Ganesha
  • Agus Adiarta Universitas Pendidikan Ganesha

DOI:

https://doi.org/10.23887/jjpte.v11i1.37761

Abstract

This study aims to determine the application of Automatic Device Design Using Audio-Based PIR (Passive InfraRed) Motion Sensors that can be used to assist the delivery process of tools, to find out an efficient and efficient development tool at the office of the Regional Research, Development and Innovation Agency, Buleleng Regency. This research includes the R&D (Research and Development) research model. The study used a questionnaire or questionnaire as a data collection instrument by content experts, media experts, and staff. From the results of the study obtained: the results of the expert trial obtained a value of 100% with a very decent classification, the results of the media expert trial were obtained by 78.12% with a very decent classification, in the small group trial the five respondents were classified as "Very Good" with the proportion 100%. The results of the lowest respondent scores are respondents 1 (R1) and 5 (R5) with a score of 37, the score is included in the very good classification in the score range 36 - <45, the results in large group trials, 19 respondents are in the "Very Good" classification. ” with a percentage of 95% and 1 respondent in the classification of “Good” with a percentage of 5%. The results of the lowest respondent scores are respondents (A10) with a score of 35, this score is included in the "good" classification in the score range of 30 - < 36. Based on the results of the study, Design and Build Automatic Notification Devices Using Audio-Based PIR (Passive InfraRed) Motion Sensors to give an appeal for health protocols at the office of the Regional Research, Development and Innovation Agency of Buleleng Regency, it is appropriate to use it as one of the supporting facilities in the delivery of health information and protocols at the office of the Regional Research, Development and Innovation Agency of Buleleng.

References

Koyan, I Wayan. 2012. Statistik Pendidikan Teknik Analisa Data Kuantitatif. Singaraja: Universitas Pendidikan Ganesha Press.

Pratama, Ika I komang. 2019. “Pengembangan Media Pembelajaran Trainer Pengendali Elektromagnetik Pada Instalasi Motor Listrik Di JurusanTeknik Ketenagalistrikan SMK Negeri 1 Denpasar”. Skripsi. FTK,

Sadiman, Arif. 2002. “Media Pembelajaran dan Proses Belajar Mengajar, Pengertian Pengembangan dan Pemanfaatannya”. Jakarta: Raja Grafindo Persada.

Setiawan, Iwan. 2006. “Programmable Logic Controller (PLC) dan Teknik Perancangan Sistem Kontrol”. Jogyakarta: Andi.

Sugiyono, 2015. “Metode Penelitian Pendidikan (Pendekatan Kuantitatif, Kualitatif, dan R&D)”. Bandung: Alfabeta.

Sugiyono. 2018. Metode Penelitian Kuantitatif kualitatif dan R&D. Alfabeta.

Sugiyono. 2019. Metode Penelitian Pendidikan. Bandung: Alfabeta.

Wiguna, Made Dhira Danu.2020. Pengembangan Media Pembelajaran Trainer Pengendali Elektromagnetik Berbasis Smart Relay Pada Instalasi Motor Listrik.

Wiratama, W. M. P. (2019). Handout sebagai Perangkat Pembelajaran Praktis. Teknologi dan Kejuruan: Jurnal Teknologi, Kejuruan, dan Pengajarannya, 42(2), 158-169.

Yasa, I Putu Oka Kusuma. 2020. Pengembangan Trainer Pengaplikasian Programmable Logic Controller (PLC) Sebagai Sistem Kontrol Traffic Light 4 Jalur Portable Untuk Siswa SMK.

Published

2022-04-01