Project-Based Learning Case Studied Model to Improving Learner Skills on Industry Revolution 4.0
DOI:
https://doi.org/10.23887/jpp.v55i3.43799Kata Kunci:
Project-Based Learning, Case Studies, Competency, Vocational EducationAbstrak
There is a gap in visual programming Learning that could be more optimal and has been unable to improve 4th- century competencies. This study aims to develop a visual programming Learning model in vocational education that can improve students' Learning abilities. This type of research is Research and Development, which refers to the ADDIE model. The subjects involved in the limited trial of the PJBL-CS model were 15 lecturers and 25 students. The trial subjects were expanded to include 110 respondents in the fourth semester of the graphic design program. Data collection will be carried out using a questionnaire. The analysis technique used the Aiken'V test, and the validity used the expert test and Focus Group Discussion (FGD). The normality test of the data distribution was carried out using Kolrnogorov Srnirnov statistics. According to experts, the result of the study is models, and support systems meet the validity standards, are based on research and development models, and are acceptable for implementation. The model that is made reliable, gets an average of 86.67 points from lecturers and 86.00 points from students. Research has produced a Case Study Project-Based Learning Model that provides opportunities for students to think critically and creatively, collaborate, and communicate well, which can learn anytime, anywhere, forming students to study independently and creating connected Learning between students and lecturers.
Referensi
Afdareza, M. Y., Yuanita, P., & Maimunah, M. (2020). Development of Learning device based on 21st century skill with implementatiton of problem based Learning to increase critical thinking skill of student on polyhedron for grade 8th junior high school. Journal of Educational Sciences, 4(2), 273–284. https://doi.org/10.31258/JES.4.2.P.273-284. DOI: https://doi.org/10.31258/jes.4.2.p.273-284
Afriana, J., Permanasari, A., & Fitriani, A. (2016). Implementation Project-Based Learning Integrated STEM to Improve Scientific Literacy Based on Gender. Jurnal Inovasi Pendidikan IPA, 2(2), 202–212. https://doi.org/10.21831/jipi.v2i2.8561. DOI: https://doi.org/10.21831/jipi.v2i2.8561
Bice, M. R., Ball, J. W., Hollman, A., & Adkins, M. (2018). Health Technology Use: Implications for Physical Activity Behaviors Among College Students. International Journal of Kinesiology in Higher Education, 1–12. https://doi.org/10.1080/24711616.2018.1516524. DOI: https://doi.org/10.1080/24711616.2018.1516524
Bolanakis, Di. E. (2019). A Survey of Research in Microcontroller Education. Revista Iberoamericana de Tecnologias Del Aprendizaje, 14(2), 50–57. https://doi.org/10.1109/RITA.2019.2922856. DOI: https://doi.org/10.1109/RITA.2019.2922856
Bravo, M. C. M., Chalezquer, C. S., & Serrano-Puche, J. (2021). Meta-framework of digital literacy: Comparative analysis of 21st century skills frameworks. Revista Latina de Comunicacion Social, 2021(79), 76–110. https://doi.org/10.4185/RLCS-2021-1508. DOI: https://doi.org/10.4185/RLCS-2021-1508
Bystrova, T. (2020). Infographics As a Tool for Improving Effectiveness of Education. KnE Social Sciences, 2020, 152–158. https://doi.org/10.18502/kss.v4i13.7710. DOI: https://doi.org/10.18502/kss.v4i13.7710
Chong, M. S. F., Shahrill, M., & Li, H. C. (2019). The integration of a problem-solving framework for Brunei high school mathematics curriculum in increasing student’s affective competency. Journal on Mathematics Education, 10(2), 215–228. https://doi.org/10.22342/jme.10.2.7265.215-228. DOI: https://doi.org/10.22342/jme.10.2.7265.215-228
Englund, C., Olofsson, A. D., & Price, L. (2017). Teaching with technology in higher education: understanding conceptual change and development in practice. Higher Education Research and Development, 36(1), 73–87. https://doi.org/10.1080/07294360.2016.1171300. DOI: https://doi.org/10.1080/07294360.2016.1171300
Fatimah, A. S., & Santiana, S. (2017). Teaching in 21St Century: Students-Teachers’ Perceptions of Technology Use in the Classroom. Script Journal: Journal of Linguistic and English Teaching, 2(2), 125. https://doi.org/10.24903/sj.v2i2.132. DOI: https://doi.org/10.24903/sj.v2i2.132
Gandasari, D., Dwidienawati, D., & Sarwoprasodjo, S. (2020). Discourse analysis: The impact of industrial revolution 4.0 and society 5.0 in Indonesia. International Journal of Advanced Science and Technology, 29(3), 5189–5199. https://doi.org/10.30880/ijast.2020.10.01.009.
Garba, S. A., Byabazaire, Y., & Busthami, A. H. (2015). Toward the use of 21st century teaching-Learning approaches: The trend of development in Malaysian schools within the context of Asia Pacific. International Journal of Emerging Technologies in Learning, 10(4), 72–79. https://doi.org/10.3991/ijet.v10i4.4717. DOI: https://doi.org/10.3991/ijet.v10i4.4717
Grollmann, P. (2008). The quality of vocational teachers: Teacher education, institutional roles and professional reality. European Educational Research Journal, 7(4), 535–547. https://doi.org/10.2304/eerj.2008.7.4.535. DOI: https://doi.org/10.2304/eerj.2008.7.4.535
Huang, T. C., Lin, W., & Yueh, H. P. (2019). How to cultivate an environmentally responsible maker? A CPS approach to a comprehensive maker education model. International Journal of Science and Mathematics Education, 17, 49–64. https://doi.org/10.1007/s10763-019-09959-2. DOI: https://doi.org/10.1007/s10763-019-09959-2
Irwanto, Saputro, A. D., Rohaeti, E., & Prodjosantoso, A. K. (2018). Promoting critical thinking and Problem Solving Skills of Preservice Elementary Teachers through Process-Oriented Guided-Inquiry Learning (POGIL). International Journal of Instruction, 11(4). https://doi.org/10.12973/iji.2018.11449a. DOI: https://doi.org/10.12973/iji.2018.11449a
Izzah, N., Asrizal, A., & Mufit, F. (2021). Meta Analisis Pengaruh Model Project based Learning dalam Variasi Bahan Ajar Fisika Terhadap Hasil Belajar Siswa SMA/SMK. Jurnal Penelitian Pembelajaran Fisika, 12(2), 159–165. https://doi.org/10.26877/jp2f.v12i2.8970. DOI: https://doi.org/10.26877/jp2f.v12i2.8970
Jalinus, N., Syahril, & Nabawi, R. A. (2019). A comparison of the problem-solving skills of students in pjBL versus CPjBL model: An experimental study. Journal of Technical Education and Training, 11(1), 36–43. https://doi.org/10.30880/jtet.2019.11.01.005. DOI: https://doi.org/10.30880/jtet.2019.11.01.005
Jaya Saragih, M., Mas Rizky Yohannes Cristanto, R., Effendi, Y., & Zamzami, E. M. (2020). Application of Blended Learning Supporting Digital Education 4.0. Journal of Physics: Conference Series, 1566(1), 0–6. https://doi.org/10.1088/1742-6596/1566/1/012044. DOI: https://doi.org/10.1088/1742-6596/1566/1/012044
Kathy, S., Pam, S., Edward, M., Iram, S., & Taggart, B. (2022). Developing 21st century skills in early childhood: The contribution of process quality to self-regulation and pro-social behaviour. 310. https://doi.org/10.1007/s11618-020-00945-x. DOI: https://doi.org/10.1007/s11618-020-00945-x
Mahardika, L., Hermawan, R., & Riyadi, A. (2017). Penerapan Model Project Based Learning Untuk Meningkatkan Kecerdasan Kinestetik Siswa Sekolah Dasar. Jurnal Pendidikan Sekolah Dasar, 11(1). https://doi.org/10.17509/jpgsd.v2i1.13238.
Marji. (2020). Interactive Multimedia Development Engine Management System ( EMS ) Using The Addie Model. Palarch’s Journal Of Archaeology Of Egypt/Egyptology, 17(4), 609–629. https://archives.palarch.nl/index.php/jae/article/download/396/473.
Mondro, A., Connell, C. M., Li, L., & Reed, E. (2020). Retaining identity: Creativity and caregiving. Dementia. https://doi.org/10.1177/1471301218803468. DOI: https://doi.org/10.1177/1471301218803468
Mulyono, H., & Agustin, E. E. (2020). Pengaruh Model Pembelajaran Project Based Learning Terhadap Hasil Belajar Siswa Pada Mata Pelajaran Pemrograman Dasar di SMK Muhammadiyah 1 Padang. JIPI : Jurnal Ilmiah Penelitian Dan Pembelajaran Informatika, 05(1), 20–24. https://doi.org/10.29100/jipi.v5i1.1518. DOI: https://doi.org/10.29100/jipi.v5i1.1518
Mustapha, R., Sadrina, Nashir, I. M., Azman, M. N. A., & Hasnan, K. A. (2020). Assessing the implementation of the project-based Learning (PJBL) in the department of mechanical engineering at a Malaysian polytechnic. Journal of Technical Education and Training, 12(1 Special Issue), 100–118. https://doi.org/10.30880/jtet.2020.12.01.011.
Mutakinati, L., Anwari, I., & Yoshisuke, K. (2018). Analysis of students’ critical thinking skill of middle school through stem education project-based Learning. Jurnal Pendidikan IPA Indonesia, 7(1), 54–65. https://doi.org/10.15294/jpii.v7i1.10495. DOI: https://doi.org/10.15294/jpii.v7i1.10495
Nilsook, P., Chatwattana, P., & Seechaliao, T. (2021). The Project-based Learning Management Process for Vocational and Technical Education. Higher Education Studies, 11(2), 20–29. https://doi.org/10.5539/hes.v11n2p20. DOI: https://doi.org/10.5539/hes.v11n2p20
Ningsih, I., Winarni, R., & Roemintoyo, R. (2019). Implementation of Digital Literacy to Achieve 21st Century Skills in The 2013’s Curriculum. https://doi.org/10.4108/eai.27-4-2019.2286855. DOI: https://doi.org/10.4108/eai.27-4-2019.2286855
Pheeraphan, N. (2013). Enhancement of the 21st century skills for Thai higher education by integration of ICT in classroom. Procedia-Social and Behavioral Sciences, 103, 365–373. https://doi.org/10.1016/j.sbspro.2013.10.346. DOI: https://doi.org/10.1016/j.sbspro.2013.10.346
Psycharis, S., & Kallia, M. (2017). The effects of computer programming on high school students’ reasoning skills and mathematical self-efficacy and problem solving. Instructional Science, 45(5), 583–602. https://doi.org/10.1007/s11251-017-9421-5. DOI: https://doi.org/10.1007/s11251-017-9421-5
Rahman, M. M. (2019). 21st Century Skill “Problem Solving”: Defining the Concept. Asian Journal of Interdisciplinary Research, 2(1), 64–74. https://doi.org/10.34256/ajir1917. DOI: https://doi.org/10.34256/ajir1917
Roll, M. J. J. (2021). Multidisciplinary digital competencies of pre-service vocational teachers. In Empirical Research in Vocational Education and Training (Vol. 13, Issue 1, pp. 1–25). SpringerOpen. https://doi.org/10.1186/S40461-021-00112-4. DOI: https://doi.org/10.1186/s40461-021-00112-4
Saputra, B., & Sujarwanta, A. (2021). Tranformasi Pembelajaran Berbasis Proyek Science, Technology, Engineering and Mathematics di Masa Pandemi Covid-19. BIOLOVA, 2(1), 1–8. https://doi.org/10.24127/biolova.v2i1.491. DOI: https://doi.org/10.24127/biolova.v2i1.491
Skobelev, P. O., & Borovik, S. Y. (2017). On The Way from Industry 4.0 To Industry 5.0: From Digital Manufacturing To Digital Society. On The Way from Industry 4.0 To Industry 5.0: From Digital Manufacturing To Digital Society, 2(6), 307–311. https://stumejournals.com/journals/i4/2017/6/307.
Sulisworo, D., Ummah, R., Nursolikh, M., & Rahardjo, W. (2020). The analysis of the critical thinking skills between blended Learning implementation: Google Classroom and Schoology. Universal Journal of Educational Research, 8(3 B), 33–40. https://doi.org/10.13189/ujer.2020.081504. DOI: https://doi.org/10.13189/ujer.2020.081504
Suryawati, E., Suzanti, F., Zulfarina, Putriana, A. R., & Febrianti, L. (2020). The implementation of local environmental problem-based Learning student worksheets to strengthen environmental literacy. Jurnal Pendidikan IPA Indonesia, 9(2), 169–178. https://doi.org/10.15294/jpii.v9i2.22892. DOI: https://doi.org/10.15294/jpii.v9i2.22892
Syakur, A., Musyarofah, L., Sulistiyaningsih, S., & Wike, W. (2020). The Effect of Project-Based Learning (PjBL) Continuing Learning Innovation on Learning Outcomes of English in Higher Education. Budapest International Research and Critics in Linguistics and Education (BirLE) Journal, 3(1), 625–630. https://doi.org/10.33258/birle.v3i1.860. DOI: https://doi.org/10.33258/birle.v3i1.860
Taar, J., & Palojoki, P. (2022). Applying interthinking for Learning 21st-century skills in home economics education. Learning, Culture and Social Interaction, 33(April 2021). https://doi.org/10.1016/j.lcsi.2022.100615. DOI: https://doi.org/10.1016/j.lcsi.2022.100615
Thompson, C. (2011). Critical Thinking across the Curriculum: Process over Output. International Journal of Humanities and Social Science, 1(9), 1–7. https://doi.org/10.1.1.463.5095&rep=rep1&type=pdf.
Wakid, M., Usman, T., & Sulistyo, B. (2020). Project based Learning model to increase the competency of automotive engineering teachers candidates. Journal of Physics: Conference Series, 1700(1), 1–8. https://doi.org/10.1088/1742-6596/1700/1/012063. DOI: https://doi.org/10.1088/1742-6596/1700/1/012063
Wangi, N. B. S., Nashrullah, M. H., & Wajdi, M. B. N. (2018). Digital Era’s Education and Aplication in Higher Education. Journal of Education And Technology, 2597(9221), 119–128. http://ejournal.ijshs.org/index.php/edu/article/download/39/30.
Zubaedi, Z., Amin, A., Asiyah, A., Suhirman, S., Alimni, A., Amaliyah, A., & Agus Kurniawan, D. (2021). Learning style and motivation: gifted young students in meaningful Learning. Journal for the Education of Gifted Young Scientists, 9(1), 57–66. https://doi.org/10.17478/jegys.817277. DOI: https://doi.org/10.17478/jegys.817277
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2022 skandar, Raimon Efendi, Ricky Ramadhan Harahap , Irwan Yusti
Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with Jurnal Pendidikan dan Pengajaran agree to the following terms:- Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. (See The Effect of Open Access)