Online Project-Based Learning (O-PjBL): Effectiveness in Teachers Training and Coaching in Vocational Education
DOI:
https://doi.org/10.23887/jet.v6i2.41195Kata Kunci:
Project-Based Learning, online learning, vocational teacher, training and coachingAbstrak
Vocational teachers need effective and interactive classroom management during online learning. This study aims to describe the concept of training, measure the perception of vocational teachers, and measure effectiveness during training and coaching of vocational teachers in online learning using project-based learning (O-PJBL). This study applies a combined evaluative method with the Plan-DO-Check-Evaluation (PDCA) stage to explore the concept of training and coaching, then test the perception and effectiveness of applying the quasi-experimental method. A total of 70 vocational teachers were involved in the study. Data were collected using observation sheets, online questionnaires with a scale of 1-4, and pretest-posttest questions. The data were analyzed based on the activities of vocational teachers and inferential statistical analysis. The results of the research are (1) the implementation of vocational teacher training and development with the PDCE approach resulting in project-based online learning based on the characteristics of the subject; (2) the perception of vocational teachers on aspects of content relevance, content suitability, presentation quality, content mastery, and time allocation is very good with a significance value based on gender is 0.892, employment status is 0.456, and age range is 0.142; and (3) there was a positive increase in the understanding of the material and the quality of learning tools. The quality of future vocational learning is determined by teachers who are up to date with changes.
Referensi
Abuhmaid, A. M. (2020). The efficiency of online learning environment for implementing project-based learning: Students’ perceptions. International Journal of Higher Education, 9(5), 76–83. https://doi.org/10.5430/ijhe.v9n5p76.
Aguskin, L., & Maryani, M. (2020). Investigating the Use of Project-Based Learning in Enhancing Indonesian University Students’ Cultural Knowledge. Humaniora, 11(3), 203–210. https://doi.org/10.21512/humaniora.v11i3.6645.
Ahmad, G. (2020). Revitalization of work oriented vocational education management system. Research, Society and Development, 9(4), 1–9. https://doi.org/10.33448/rsd-v9i4.2753.
Almahasees, Z., Mohsen, K., & Amin, M. O. (2021). Faculty’s and Students’ Perceptions of Online Learning During COVID-19. Frontiers in Education, 6, 119. https://doi.org/10.3389/FEDUC.2021.638470/BIBTEX.
Almulla, M. A. (2020). The Effectiveness of the Project-Based Learning (PBL) Approach as a Way to Engage Students in Learning. SAGE Open, 10(3). https://doi.org/10.1177/2158244020938702.
Astuti, M., Arifin, Z., Mutohhari, F., & Nurtanto, M. (2021). Competency of Digital Technology: The Maturity Levels of Teachers and Students in Vocational Education in Indonesia. Journal of Education Technology, 5(2), 254–262. https://doi.org/10.23887/jet.v5i3.35108.
Bagheri, M., Ali, W. Z. W., Abdullah, M. C. B., & Daud, S. M. (2020). Effects of Project-based Learning Strategy on Self-directed Learning Skills of Educational Technology Students. Contemporary Educational Technology, 4(1), 1–12. https://doi.org/10.30935/cedtech/6089.
Beneroso, D., & Robinson, J. (2022). Online project-based learning in engineering design: Supporting the acquisition of design skills. Education for Chemical Engineers, 38(October 2021), 38–47. https://doi.org/10.1016/j.ece.2021.09.002.
Billett, S. (2011). Vocational Education: Purposes, Traditions and Prospects. Springer. https://doi.org/10.1007/978-94-007-1954-5.
Chanpet, P., Chomsuwan, K., & Murphy, E. (2020). Online Project-Based Learning and Formative Assessment. Technology, Knowledge and Learning, 25(3), 685–705. https://doi.org/10.1007/s10758-018-9363-2.
Clark, L., & Winch, C. (2007). Vocational Education : International Approaches, Developments and Systems. Routledge.
Darling-Hammond, L., Flook, L., Cook-Harvey, C., Barron, B., & Osher, D. (2019). Implications for educational practice of the science of learning and development. Https://Doi.Org/10.1080/10888691.2018.1537791, 24(2), 97–140. https://doi.org/10.1080/10888691.2018.1537791.
Dogara, G., Saud, M. S. Bin, Kamin, Y. Bin, Hamid, M. Z. B. A., & Nordin, M. S. Bin. (2019). Developing soft skills through project-based learning in technical and vocational institutions. International Journal of Engineering and Advanced Technology, 9(1), 2842–2847. https://doi.org/10.35940/ijeat.A9803.109119.
Dym, C. L., Agogino, A. M., Eris, O., Frey, D. D., & Leifer, L. J. (2005). Engineering Design Thinking, Teaching, and Learning. Journal of Engineering Education, 94(1), 103–120. https://doi.org/10.1002/J.2168-9830.2005.TB00832.X.
Eichhorst, W., Rodriguez-Planas, N., Schmidl, R., & Zimmermann, K. F. (2021). A Roadmap to Vocational Education and Training Systems Around the World. SSRN Electronic Journal, 7110. https://doi.org/10.2139/ssrn.2199793.
Gunadi, Sofyan, H., Nurtanto, M., Arifin, Z., & Sudira, P. (2020). Vocational Teachers Readiness in Face of the Industrial Revolution 4.0: Vocational Teachers Perceptions in Yogyakarta-Indonesia. Journal of Physics: Conference Series, 1700(1), 012082. https://doi.org/10.1088/1742-6596/1700/1/012082.
Guo, P., Saab, N., Post, L. S., & Admiraal, W. (2020). A review of project-based learning in higher education: Student outcomes and measures. International Journal of Educational Research, 102(12), 1–13. https://doi.org/10.1016/j.ijer.2020.101586.
Haryanto, Kusuma, W. M., Mutohhari, F., Nurtanto, M., & Suyitno, S. (2021). Innovation Media Learning: Online Project-Based Learning (O-PBL) on Drawing Competence in Automotive Engineering Using Video on YouTube. Journal of Physics: Conference Series, 2111(1). https://doi.org/10.1088/1742-6596/2111/1/012020.
Hernáiz-Pérez, M., Álvarez-Hornos, J., Badia, J. D., Giménez, J. B., Robles, Á., Ruano, V., & San-Valero, P. (2021). Contextualized project-based learning for training chemical engineers in graphic expression. Education for Chemical Engineers, 34(1), 57–67. https://doi.org/10.1016/j.ece.2020.11.003.
Holmes, W., Nguyen, Q., Zhang, J., Mavrikis, M., & Rienties, B. (2019). Learning analytics for learning design in online distance learning. Distance Education, 40(3), 309–329. https://doi.org/10.1080/01587919.2019.1637716.
Hussin, H., Jiea, P. Y., Rosly, R. N. R., & Omar, S. R. (2019). Integrated 21st century science, technology, engineering, mathematics (STEM) education through robotics project-based learning. Humanities and Social Sciences Reviews, 7(2), 204–211. https://doi.org/10.18510/hssr.2019.7222.
Ichikawa, H., Goto, Y., Matsuda, K., & Hakur, J. (2019). Practice and Evaluation of Project Based Learning with Mixed Grade. Computer Software, 36(1), 3–13. https://doi.org/10.11309/jssst.36.3.
Kanwar, A., Balasubramanian, K., & Carr, A. (2019). Changing the TVET paradigm: new models for lifelong learning. Https://Doi.Org/10.1080/14480220.2019.1629722, 17(sup1), 54–68. https://doi.org/10.1080/14480220.2019.1629722.
Kayode, A. A., & Adeyemi, A. O. (2016). Revitalization of Technical and Vocational Education for Youth Employment and Poverty Alleviation. International Journal of Educational Sciences, 13(3). https://doi.org/10.1080/09751122.2016.11890460.
Kholifah, N., Irwanto, I., Ramdani, S. D., & Nurtanto, M. (2020). Vocational skills learning model strategies during covid-19. Journal of Physics: Conference Series, 1700(1). https://doi.org/10.1088/1742-6596/1700/1/012092.
Kizkapan, O., & Bektas, O. (2017). The effect of project based learning on seventh grade students’ academic achievement. International Journal of Instruction, 10(1), 37–54. https://doi.org/10.12973/iji.2017.1013a.
Kılınç, M. (2019). The Usage Level of Time-Saving Measurement and Evaluation Techniques in Teacher Training Programs. International Education Studies, 12(10), 1–10. https://doi.org/10.5539/ies.v12n10p123.
Made Sudana, I., Apriyani, D., & Nurmasitah, S. (2019). Revitalization of vocational high school roadmap to encounter the 4.0 industrial revolution. Journal of Social Sciences Research, 5(2), 338–342. https://doi.org/10.32861/jssr.52.338.342.
Malik, R. S. (2018). Educational Challenges in 21st Century and Sutainable Development. Journal of Sustainable Development Education and Research, 2(1), 9–20. https://doi.org/10.17509/jsder.v2i1.12266.
Mardapi, D. (2012). Pengukuran, Penilaian, dan Evaluasi Pendidikan. Mitra Cendekia Press.
Melki, H., & Bouzid, M. S. (2021). Future teachers’ views on teaching profession and mentoring during a tvet practical internship in the field of physical education. Journal of Technical Education and Training, 13(2), 34–43. https://doi.org/10.30880/jtet.2021.13.02.004.
Mikkonen, S., Pylväs, L., Rintala, H., Nokelainen, P., & Postareff, L. (2017). Guiding workplace learning in vocational education and training: A literature review. Empirical Research in Vocational Education and Training, 9(1), 1–22. https://doi.org/10.1186/S40461-017-0053-4/TABLES/5.
Muhammad, N., Sudira, P., Kholifah, N., Samsudin, A., & Warju, W. (2020). Vocational Teachers’ Perceptions and Perspectives in the Implementation of STEM Learning in the 21st Century. TEM Journal, 9(4), 1665–1680. https://doi.org/10.18421/TEM94-46.
Mustapha, R., Sadrina, Nashir, I. M., Azman, M. N. A., & Hasnan, K. A. (2020). Assessing the implementation of the project-based learning (PJBL) in the department of mechanical engineering at a Malaysian polytechnic. Journal of Technical Education and Training, 12(1 Special Issue), 100–118. https://doi.org/10.30880/jtet.2020.12.01.011.
Mutohhari, F., Sofyan, H., & Nurtanto, M. (2021). Technological Competencies: A Study on the Acceptance of Digital Technology on Vocational Teachers in Indonesia. Proceedings of the 1st International Conference on Law, Social Science, Economics, and Education, ICLSSEE 2021, 1–11. https://doi.org/10.4108/eai.6-3-2021.2305971.
Mutohhari, F., Sudira, P., & Nurtanto, M. (2021). Automotive Engineering Drawing Learning: Effective Online Learning Using Autocad Application. Journal of Education Technology, 5(2), 214–219. https://doi.org/10.23887/jet.v5i2.33197.
Mutohhari, F., Sutiman, S., Nurtanto, M., Kholifah, N., & Samsudin, A. (2021). Difficulties in implementing 21st century skills competence in vocational education learning. International Journal of Evaluation and Research in Education, 10(4), 1229–1236. https://doi.org/10.11591/ijere.v10i4.22028.
Nemec, P. B. (2018). Training Evaluation. Psychiatric Rehabilitation Journal, 41(1), 80–91. https://doi.org/10.1037/prj0000291.
Ngereja, B., Hussein, B., & Andersen, B. (2020). Does project-based learning (PBL) promote student learning? a performance evaluation. Education Sciences, 10(11), 1–15. https://doi.org/10.3390/educsci10110330.
Nilsook, P., Chatwattana, P., & Seechaliao, T. (2021). The Project-based Learning Management Process for Vocational and Technical Education. Higher Education Studies, 11(2), 20–29. https://doi.org/10.5539/hes.v11n2p20.
Noviyanti, A., Paristiowati, M., & Moersilah. (2021). Online project-based learning on surface tension during Covid-19 pandemic. AIP Conference Proceedings, 2331, 1–9. https://doi.org/10.1063/5.0041802.
Nurtanto, M., Arifin, Z., Sofyan, H., Warju, W., & Nurhaji, S. (2020). Development of model for professional competency assessment (Pca) in vocational education: Study of the engine tune-up injection system assessment scheme. Journal of Technical Education and Training, 12(2), 34–45. https://doi.org/10.30880/jtet.2020.12.02.004.
Nurtanto, M., Kholifah, N., Masek, A., Sudira, P., & Samsudin, A. (2021). Crucial problems in arranged the lesson plan of vocational teacher. International Journal of Evaluation and Research in Education, 10(1), 345–354. https://doi.org/10.11591/ijere.v10i1.20604.
Onyema, E. M., Eucheria, N. C., Obafemi, F. A., Sen, S., Atonye, F. G., Sharma, A., & Alsayed, O. A. (2020). Impact of Coronavirus Pandemic on Education. Journal of Education and Practice, 11(13), 108–121. https://doi.org/10.7176/jep/11-13-12.
Pan, G., Shankararaman, V., Koh, K., & Gan, S. (2021). Students’ evaluation of teaching in the project-based learning programme: An instrument and a development process. International Journal of Management Education, 19(2), 1–11. https://doi.org/10.1016/j.ijme.2021.100501.
Pavlova, M. (2009). Technology and Vocational Education for Sustainable Development. Springer Science Business Media B.V.
Pawar, R., Kulkarni, S., & Patil, S. (2020). Project based learning: An innovative approach for integrating 21st century skills. Journal of Engineering Education Transformations, 33(4), 58–63. https://doi.org/10.16920/jeet/2020/v33i4/139423.
Philips, J. J., & Philips, P. P. (2016). Handbook of Training Evaluation and Measurement Methods. Routledge.
Prasetya, A. T., Haryani, S., Cahyono, E., & Sudarmin. (2019). Review challenges and constraints of project-based learning in chemical instrumentation to enhance competence and life skills. Journal of Physics: Conference Series, 1321(3), 1–8. https://doi.org/10.1088/1742-6596/1321/3/032055.
Purvis, B., Mao, Y., & Robinson, D. (2019). Three pillars of sustainability: in search of conceptual origins. Sustainability Science, 14(3), 681–695. https://doi.org/10.1007/S11625-018-0627-5/FIGURES/1.
Rabiman, R., Sudira, P., Sofyan, H., & Nurtanto, M. (2021). Practical Learning Media in Subject Maintenance of Chassis and Power (MCP) Based Online: Simple Learning Using Videos on YouTube. International Journal of Interactive Mobile Technologies, 15, 130–145. https://doi.org/https://doi.org/10.3991/ijim.v15i03.14943.
Sadrina, S., Mustapha, R., & Ichsan, M. (2018). The evaluation of project-based learning in Malaysia: propose a new framework for polytechnics system. Jurnal Pendidikan Vokasi, 8(2), 143–150. https://doi.org/10.21831/jpv.v8i2.19100.
Salido López, P. V. (2020). Active methodologies in initial teachers’ training: Project-Based Learning (PBL) and arts education. Profesorado, 24(2), 120–143. https://doi.org/10.30827/PROFESORADO.V24I2.13656.
Salma, W. A., Basori, B., & Hatta, P. (2021). The Effectiveness and effect of Project-Based Blended Learning on Student Achievement in Online Learning at Surakarta, Indonesia. IJIE (Indonesian Journal of Informatics Education), 5(1), 1–8. https://doi.org/10.20961/ijie.v5i1.44029.
Sartor-Harada, A., Azevedo-Gomes, J., Pueyo-Villa, S., & Tejedor, S. (2020). Analysis of teaching competences in service-learning projects in higher education: Teachers’ perceptions. Formacion Universitaria, 13(3), 31–42. https://doi.org/10.4067/S0718-50062020000300031.
Savickas, M. L. (2011). New questions for vocational psychology: Premises, paradigms, and practices. Journal of Career Assessment, 19(3), 251–258. https://doi.org/10.1177/1069072710395532.
Shahroom, A. A., & Hussin, N. (2018). Industrial Revolution 4.0 and Education. International Journal of Academic Research in Business and Social Sciences, 8(9), 314–319. https://doi.org/10.6007/ijarbss/v8-i9/4593.
Sharma, P. (2019). Digital Revolution of Education 4.0. International Journal of Engineering and Advanced Technology, 9(2), 3558–3564. https://doi.org/10.35940/ijeat.a1293.129219.
Shpeizer, R. (2019). Towards a successful integration of project-based learning in higher education: Challenges, technologies and methods of implementation. Universal Journal of Educational Research, 7(8), 1765–1771. https://doi.org/10.13189/ujer.2019.070815.
Silwal, P. U. K., & Bhatta, K. (2017). Assessing the effectiveness of Vocational Education and Trainings (VET) in Improving Employability: A Case Study of Skills for Employment Programs in Nepal. International Journal of English Literature and Social Sciences, 2(5), 131–139. https://doi.org/10.24001/ijels.2.5.16.
Simon, E., & Maskit, D. (2016). New directions in teacher-training evaluation. International Journal of Assessment and Evaluation, 23(1), 27–34. https://doi.org/10.18848/2327-7920/cgp/v23i01/58946.
Strevy, D. (2014). Focus on Teacher Education: Project-Based Learning; Is There a Problem-Based Difficulty? Childhood Education, 90(6), 1–14. https://doi.org/10.1080/00094056.2014.983026.
Sudira, P. D. D. M. . (2012). TVET ABAD XXI Filosofi, Teori, Konsep dan Startegi Pembelajaran Vokasional. Foreign Affairs, 91(5), 1689–1699. https://doi.org/10.1017/CBO9781107415324.004.
Sudjimat, D. A., Nopriadi, & Yoto. (2019). Study of Implementation of Project Based Learning in Mechanical Engineering Study Program of Vocational High School. Journal of Physics: Conference Series, 1165(1). https://doi.org/10.1088/1742-6596/1165/1/012024.
Thyer, B. A. (2012). Quasi-Experimental Research Design. Oxford University Press, Inc.
Trilling, B., & Fadel, C. (2012). 21st Century Skills: Learning for Life in Our Times (1st ed.). Calif: John Wiley And Sons Inc.
Ummah, S. K., Inam, A., & Azmi, R. D. (2019). Creating manipulatives: Improving students’ creativity through project-based learning. Journal on Mathematics Education, 10(1), 93–102. https://doi.org/10.22342/jme.10.1.5093.93-102.
Vargas, N. V., Luis, J., Ortiz, A., Manuel, V., & Ceballo, A. (2018). Project Based Learning in the Technical and Vocational Education and Training. International Journal of Environmental & Science Education, 13(9), 767–776. http://www.ijese.com.
Wahyudi, W., & Winanto, A. (2018). Development of Project-based Blended Learning (PjB2L) Model To Increase Pre-Service Primary Teacher Creativity. Journal of Educational Science and Technology (EST), 8(2), 91–102. https://doi.org/10.26858/est.v4i2.5563.
Yunus, M., Setyosari, P., Utaya, S., & Kuswandi, D. (2021). The influence of online project collaborative learning and achievement motivation on problem-solving ability. European Journal of Educational Research, 10(2), 813–823. https://doi.org/10.12973/EU-JER.10.2.813.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2022 Putu Sudira, Muhammad Nurtanto, Nani Masrifah, Evi Nurdianah, Farid Mutohhari
Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with the Journal of Education Technology agree to the following terms:
- Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. (See The Effect of Open Access)
