Vol. 11 No. 2 (2023)

Articles

• Analisis Pengaruh Uap Boiler Pipa Api Kapasitas 6 Ton Pada Proses Produksi V-Belt di PT XYZ Analysis of the Effect of 6 Ton Capacity Fire Pipe Boiler Steam on the V-Belt Production Process at PT XYZ

  Mohammad Haikal Abdurraziq, Reza Setiawan

  134-145

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.62040

• Proses Produksi Arm Rear Brake Tipe Kyea Untuk Sepeda Motor Honda Verza PT. XYZ Kyea Type Rear Brake Arm Production Process For Honda Verza Motorcycles PT. XYZ

  Alvin Iskandar Aditya, Kardiman, Bobie Suhendra

  146-159

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.67471

• Pengembangan Media Pembelajaran Interaktif Berbasis WEB Pada Materi Sistem Pengereman Untuk Meningkatkan Motivasi Siswa di Sekolah Menengah Kejuruan Development of WEB-Based Interactive Learning Media on Braking System Material to Increase Student Motivation in Vocational High Schools

  Ketut Arya Dwipa, Edi Elisa, Gede Widayana

  160-167

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.63929

• Pengaruh Variasi Diameter Pegas Sentrifugal Kampas Kopling Ganda Terhadap Performansi Sepeda Motor Dengan Sistem Tranmisi CVT Effect Of Variations In The Diameter Of The Double-Clutch Lining Centrifugal Spring On Motorcycle Performance With Cvt Transmission System

  I putu Arya Wiguna, Gede Widayana, I gede Wiratmaja

  168-173

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.59593

• Analisis Sifat Mekanik Pada Komposit Serat Daun Nanas Dengan Filler Talc Mg₃Si₄O₁(Oh)₂ Analysis of Mechanical Properties of Pineapple Leaf Fiber Composites With Filler Talc Mg₃Si₄O₁₀(Oh)₂

  Dadan Ma'arif, Ratna Dewi Anjani, Deri Teguh Santoso

  174-183

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.65803

• Analisis Pengaruh Media Pendingin Terhadap Sifat Mekanik Sambungan Las TIG (Tungsten Inert Gas) Pada Baja St 42 Analysis Of The Effect Of Cooling Media On The Mechanical Properties Of TIG (Tungsten Inert Gas) Welded Joints In St 42 Steel

  Disya Haeriati Ariwiana Putri, Ratna Dewi Anjani, Iwan Nugraha Gusniar

  184-195

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.65816

• Pengembangan Media Pembelajaran Berbasis Android Dengan Aplikasi Appy Pie Pada Materi Dasar Pemeliharaan dan Perbaikan Otomotif Untuk Sekolah Menengah Kejuruan Development of Android-Based Learning Media with the Appy Pie Application on Basic Materials for Automotive Maintenance and Repair for Vocational High Schools

  Galang Kawih, Edi Elisa, I Nyoman Pasek Nugraha

  196-203

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.62639

• Optimalisasi Desain Sepeda Motor Listrik Baby Ganesha 1.0 Generasi II Menggunakan Software Solidworks 2018 Optimization Of Baby Ganesha 1.0 Generation II Electric Motorcycle Design Using Solidworks 2018 Software

  Kadek Surya Wijaya, Kadek Rihendra Dantes, I Nyoman Pasek Nugraha

  204-212

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.64011

• Analisis Tegangan Statik Pada Rancangan Swing Arm Kendaraan Motor Listrik Ganesha 1.0 Generasi 2 Dengan Menggunakan Software Solidwork 2018 Analysis Of Static Stress In The Development Of Swing Arm Design On Ganesha 1.0 Generation 2 Electricmotor Vehicles Using Solidwork Software 2018

  Mohammad Zakarianto, Kadek Rihendra Dantes, I Nyoman Pasek Nugraha

  213-222

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.64010

• Pengaruh Fraksi Volume Komposit Serat Pelepah Pisang Kepok Dengan Polyester Dan Filler Terhadap Sifat Mekanik Effect of Volume Fraction of Kepok Banana Leaf Fiber Composite with Polyester and Filler on Mechanical Properties

  Rinto Fuazzidin, Ratna Dewi Anjani, Viktor Naubnome

  223-237

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.66002

• Pengaruh Paduan Serbuk Bambu Dan Matriks Polyethylene Terhadap Sifat Mekanik Wpc Effect of Bamboo Powder Alloy and Polyethylene Matrix on The Mechanical Properties of Wpc

  Arfansyah Ramdhani, Ratna Dewi Anjani, Iman Dirja

  238-252

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.66005

• Optimalisasi Aliran Fluida Pada Permukaan Body Prototype Skuter E-Gaspol Mengunakan Sofware Solidwork 2019

  Made Widya Sarasta, Gede Widayana, Edi Elisa

  253-263

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.64023

• Studi Pengaruh Variasi Bentuk Mata Pisau Pada Mesin Pemotong Rumput Dengan Simulasi Solidworks Study Of The Effect Of Blade Shape Variations On Lawn Mower With Solidworks Simulation

  Mojibur Rohman, Moh. Febri, Ratna Fajarwati Meditama, Bella Cornelia Tjiptady

  264-275

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.61421

• Peran Metode Coating Limbah Radiator Coolant dan Cat Minyak Sebagai Uji Laju Korosi Terhadap Logam Ferro (Fe) Berbasis Quenching Treatment The Role of Coating Methods for Radiator Coolant Waste and Oil Paints as a Corrosion Test for Ferro (Fe) Based Quenching Treatment

  Rudi Hermawan, Mochamad Ghazali Al Fharezi, Taufik Hidayat, Lintang Auliya Kurdiati, Priti, Liza Hertias Ningrum

  276-285

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.67593

• Persepsi Mahasiswa (Calon Guru) Pendidikan Vokasi Terhadap Pendidikan Science, Technology, Engineering, dan Mathematics (STEM) Perceptions of Vocational Education Students on Science, Technology, Engineering, and Mathematics (STEM) Education

  Islami Fatwa, Widya

  286-294

  • PDF

  DOI: https://doi.org/10.23887/jptm.v11i2.68730